The SensorLink™ pneumatic tool sensor is attached to air powered tools by replacing the regular male fitting. The NAS Analytics Platform monitors the tool’s trigger time, vibration level, consumption data and maintenance cycles as well set up reports based on that information.
Sensor is equipped with pre-charged lithium polymer battery with no maintenance required during the product lifetime.
Real-time usage data is gathered wirelessly and processed automatically. Data is accessible on any PC or smartphone connected to the internet.
Ordering code IM3001.*
Physical
-Length
61.1 mmDiameter
21.0 mmWeight
24g Aluminium 47g Stainless steelNominal flow diameter
5.0 mmThread type
1/4” BSP / G 1/4” NPTConnector standard
EuroprofileOperational
-Operating temperature
0°C..+30°CAir flow
1050 l/min**Max. working pressure:
10 bar (145 PSI)RF range
up to 30 m*Battery lifetime
up to 2 years*Communication
2.4 GHz NAS SensorLink Bluetooth LE* Battery lifetime and signal range are largely dependent on the location and usage. Low temperature reduces battery life. Reinforced and metal walls block reception. Industry average is shown on data sheet.
** Flow capacity is measured at 6 bar (87 PSI) inlet pressure, and pressure drop at 0.6 bar (8.7 PSI).
| Physical | – |
|---|---|
| Length | 61.1 mm |
| Diameter | 21.0 mm |
| Weight | 24g Aluminium |
| Nominal flow diameter | 5.0 mm |
| Thread type | 1/4” BSP / G |
| Connector standard | Europrofile |
| Operational | – |
| Operating temperature | 0°C..+30°C |
| Air flow | 1050 l/min** |
| Max. working pressure: | 10 bar (145 PSI) |
| RF range | up to 30 m* |
| Battery lifetime | up to 2 years* |
| Communication | 2.4 GHz NAS SensorLink |
